Designed for Underbridge Access Inspections, and Bridge Maintenance work.
First Boom
Hinged to the masthead and provides a minimum of 16 feet horizontal reach. It rotates hydraulically 360 degrees and tilts from 66 degrees above to 26 degrees below horizontal, providing operation from either side of the truck. Wide, multi-lane bridges can be covered from both sides, always working with the flow of traffic.
Second Boom
Hydraulically telescopes from 16’ to 28’, extending downward. Hinge to this boom is a hydraulically operated work platform, 24" wide x 13'6" long. By articulating the second boom, the platform is positioned back under a bridge up to 27'. The addition of an optional extension provides a longer platform capable of reach under and across up to 40'.
Third Boom
The Snooper Series 140 is available in either Basket or Platform configurations with a robust 600 lb. load capacity.
Basket Boom- Featuring a telescoping 3rd boom and (2) 1-man baskets. Pinned to the second boom hydraulically telescopes from 11'10" to 27'2" and articulate 117 degrees. The third section or basket boom is gravity leveled and equipped with a hydraulic dampener to prevent unwanted moment. The basket boom is capable of extending back under the bridge approximately forty (40) feet with booms angled.
Platform Boom- Hinge to the Second Boom is a hydraulically operated work platform, 24" wide x 13'6" long. By articulating the second boom, the platform is positioned back under a bridge up to 27'. The addition of an optional extension provides a longer platform capable of reach under and across up to 40'. The work platform is capable of extending back under the bridge approximately forty (40) feet with booms angled.
Operates in One Lane
The Snooper Series 140 requires only 10' with stabilizer down, less than one lane of traffic. The total vehicle weight is under 50K lbs. and front axle will not exceed 12K lbs. (platform) or 16K lbs (basket). Rear tandem, 34K lbs.
360 Degrees Inspection
The 360 degrees turn capability allows the Snooper Series 140 to be operated from either side of the truck.
Proven Quality
All components are brand name, American-made, manufactured and assembled in the United States.
Compliant with ANSI A92.8-2012 for Vehicle-Mounted Bridge Inspection and Maintenance Devices